Hardware Components
- 1 Smart camera
- 1 Hub
- 1 Dolby Conference Phone
- Hub Power Adapter
- Ethernet cables
- 2 HDMI cables
- 1 1-ft length USB 3.0 cable
- 1 6-ft length USB 3.0 cable
Camera Features
- Image sensor: 4K, 13
- Frame rate: ≤60 fps (frames per second)
- View angle: 95°
- Lens: fixed focus f/2.0
- Zoom: ≤2x digital zoom
- Output format: YUV422
- Connectivity: USB 3.0
- Mounting: tilt range +/- 20°
- HDR video mapping
- Whiteboard view
- Supports multiple mounting configurations
Video
- Codecs: H.264 Baseline and High Profile
- Max encode: 1080p30
- Max decode: 1080p30
Hub Features
- OS: Linux
- Network: Gigabit (RJ-45) network interface for network
- connectivity ports
- 3 x USB 3.0
- 1 x HDMI Input
- 2 x HDMI Output (Dual monitor support)
- 1 x power
- 1 x Ethernet
- 1 x Power over Ethernet (PoE) to the Dolby Conference
- Phone
- Content sharing
- HDMI In for local/broadcast (to be enabled soon)
- Wireless sharing
- Additional: Kensington® security slot
Dolby Conference Phone Features
- Audio features: Full duplex, noise suppression, acoustic
- Echo cancellation, spatial audio capture & playback
- Audio range: Wideband HD, 160 Hz—8 kHz
- Full duplex
- Noise suppression
- Acoustic echo cancellation
- Audio codecs: Dolby Voice Codec
- Microphone range: 6.1 m/20 ft (Optional extension mics available)
Join & In-Meeting Features
- Touch-screen meeting management
- Tap to Join - Start pre-scheduled meeting from on-screen calendar
- Allow meeting guests to join end meeting
- Toggle Whiteboard View
- Control camera zoom level and panning
- Start and end audio-only calls using the dial pad
- Tactile button meeting management
- Mute/unmute
- Control speaker volume
- Unlimited audio-only calls (optional add-on): Dial domestic and international phone numbers to start audio-only calls using the touch-screen dial pad.
- Add a phone caller (optional add-on): Add an audio-only phone number to an in-progress video meeting by dialing their phone number using the touch-screen dial pad.
Network Features
- QoS Support: IEEE 802.1p/Q tagging (VLAN), Layer 3 TOS and DSCP
- IP address configuration: TCP/IP (IPv4), DHCP/static IP
- Web: HTTP/HTTPS web server, web proxy auto-detection, and proxy auto-configuration
- RTCP support (RFC 1889)
- LDAP directory support
- WebRTC
- Hardware diagnostics status and statistics
- Time and date synchronization: SNTP
- Plug-and-play provisioning enabled by Highfive and Dolby Voice
Security
- Encryption: TLS (Transport Layer Security) for SIP, SRTP encryption for media, 128 bits AES
- Network Access Control: IEEE 802.1x
- Built-in certificate
Operating Requirements and Specifications
- External power adapter: 90-240v AC input
- Power consumption: Idle <2.8W, normal operating—24w; max—30w
- Operating humidity: 20–85% (non-condensing)
- Operating temperature: 0°–40° C (32°–104° F)
- Storage temperature: -30–50° C (-22°–122° F)
Hardware Dimensions (H x W x D)
- Camera + mount: 6.2 x 13 x 9.6 cm (2.4” x 5.1” x 3.8”)
- Hub: 4 x 31.6 x 11 cm (1.6” x 12.4” x 4.3”)
- Phone: 5.6 x 30 x 32 cm (2.2” x 11.8” x 12.6”)
Specifications are subject to change without notice.